Discipline Code: 080802

I.Subject Brief

This discipline was founded in 1975 as an undergraduate major in Light Industry Automation. In 1997, the undergraduate major of electrical engineering and automation was established, and in 2003, obtained a master's degree authorization point for the second-level discipline of power electronics and power transmission. In 2017, a master's degree authorization point for the first-level discipline of "Electrical Engineering" was obtained. Based on light industry, this discipline adheres to the development path of combining with the light industry, relying on the 800kW campus rooftop photovoltaic demonstration power station training base of the Ministry of Industry and Information Technology, the China Light Industry Cleaner Production Automation and Informatization Key Laboratory, the Ministry of Education’s Internet + and Made in China 2025 Industry-Education Integration Innovation bases and other national and provincial scientific research platforms, and have formed the following characteristic disciplines: electric power drive system and its intelligent control, new energy power generation and smart micro-grid technology, robots and Intelligent Systems.

There are 34 full-time teachers in the major, including 1 advanced individual of teacher morality in Shaanxi Province, 1 famous teaching teacher in Shaanxi Province, 1 young and middle-aged scientific and technological innovation leader in Shaanxi Province, and 1 flexible introduction of academician of the International Eurasian Academy of Sciences, and 1 The National Science Fund for Distinguished Young Scholars. There are 8 provincial and ministerial-level teaching and research platforms. Over the past 20 years, more than 600 postgraduates have been trained. Graduates are mainly engaged in scientific research, teaching, production and management in scientific research institutes, colleges and universities and related enterprises and institutions in the electrical engineering field such as State Grid.

II.Educational Goals

To cultivate international students who are familiar with China's national conditions and understand China's moral values, values and cultural characteristics. International students need to respect China's political system, abide by laws and regulations, have certain Chinese language skills, have good academic ethics and learning attitudes, and have solid and broad basic theories and systematic and in-depth professional knowledge of electrical engineering. International students can understand the cutting-edge dynamics of the discipline, and can play a role as a bridge to promote Sino-foreign exchanges. International students are international high-level innovative scientific and technological talents with the ability to independently engage in scientific research, education and teaching, and technological development.

III.Major Research Fields

The main research fields of this discipline are: power system and integrated energy, control theory and technology, electromagnetic field and wave, control system and application, pattern recognition and data mining, etc.

The main research directions and contents are:

1. Electric drive system and its intelligent control

Taking the application of electric drive and its intelligent control technology in various fields as the research background, carry out theoretical and applied technology research on electric drive control, intelligent control of high-power equipment, special motor design, etc. Specifically, it includes the control method and application of motor magnetic field running trajectory, intelligent control technology of industrial engineering equipment, special motor structure and its design method, etc.

2. New energy power generation and smart micro-grid technology

Taking new energy power generation and smart micro-grid as the research object, carry out theoretical and applied technology research on new energy power generation and smart micro-grid energy dispatching. Specifically, it includes storage and transmission integration technology, new energy generation power tracking technology, power system stability control technology, factory power supply system design and automation technology, etc.

3. Robots and Intelligent Systems

Taking robot systems in the field of electrical engineering and related industrial application scenarios as the research object, carry out the research on the theory and application technology of the design and development of various types of robot systems, the development and synthesis of intelligent measurement and control systems, etc. Specifically, it includes control algorithm and complex task scheduling mechanism, system integration and optimization design, engineering application of machine vision technology, deep learning and artificial intelligence technology, etc.

IV.Duration and Length of Study

The length of study for international master students is 3 years, and the longest study period is 5 years (including suspension of study and retention of student status except for enlistment).

V.Training Method

1. Adopt a training method that combines curriculum teaching and scientific research

(1) Postgraduates should complete the course study (except HSK courses) in the first and second semesters and complete all the course credits required for the degree;

(2) Postgraduates should conduct scientific research and the writing of graduation thesis in the second and third academic years to prepare for graduation and degree awarding;

(3) In combination with the development trend of electrical engineering disciplines, encourage tutors to cultivate international master students with domestic and foreign scientific research institutions and enterprises through joint training, practical exchanges, etc.

2. Adopt the tutor responsibility system

(1) Adhere to the principle that the supervisor is the first responsible person for postgraduate training, and the supervisor is responsible for the specific guidance from the formulation of the training plan, the selection of the thesis topic, the scientific research, the writing of the thesis to the defense of the dissertation;

(2) Mentors are not only responsible for guiding postgraduate scientific research work, but also concerned about postgraduate political, ideological and moral character, mentors should have strict requirements on postgraduate students in terms of rigorous scholarship, scientific research ethics, and unity and cooperation;

(3) The supervisor should also cooperate and assist the postgraduate education management department to do a good job in the management of postgraduates.

VI.Curriculum and Credit requirement

1. The composition of the curriculum system

The international postgraduate course system consists of four parts: public compulsory courses, professional compulsory courses, public elective courses and professional elective courses;

2. Credit requirements

The credit system is adopted for the training of international master students. Graduate students are required to take at least 35 credits during their studies, including at least 32 credits for courses (16 credits for degree courses and no less than 4 credits for public elective courses), and 3 credits for compulsory courses. All course examinations with a score of 60 or above can be awarded for the credits of the course.

Please refer to the attached table for specific courses.

VII.Compulsory Part

Graduate students should conduct scientific research, academic and practical activities, and obtain 3 credits after passing the examination.

1. Scientific research activities (1 credit):

Postgraduates must participate in at least one scientific research project. The person in charge of the project will conduct assessment and write comments. After passing the assessment, one credit will be awarded.

2. Academic activities (1 credit):

Postgraduates must complete the following academic activities during their studies. The organizer or tutor of the college is responsible for recording and evaluating them. After passing the evaluation, one credit will be awarded.

(1) Participate in at least 10 academic reports or academic salons organized by the school or college;

(2) Participate in at least one academic month activity of the school;

(3) An academic report should be given within a certain range;

(4) A subject frontier development report or review paper should be written.

The school encourages graduate students to participate in international high-level academic conferences, and graduate students who read academic papers at high-level international conferences can directly obtain academic credits.

3. Practical activities (1 credit)

Graduate students should participate in practical activities, and the supervisor or relevant management personnel of the college will be responsible for the assessment. After passing the assessment, 1 credit will be awarded. The main forms are:

(1) Lectures, tutoring, assisting in guiding undergraduate experiments and graduation thesis, etc.;

(2) Go deep into the grass-roots level to engage in technical guidance and social services related to the majors studied;

(3)Organization of various social activities, cultural and sports activities, voluntary service activities, and organization and participation of academic competitions for postgraduate students.

VIII.Thesis

The working procedures of the dissertation should at least include the opening, mid-term inspection, pre-defense, defense and other links. Among them, the actual working time of the thesis should not be less than 18 months after the opening of the thesis.

1. Thesis opening report

The dissertation opening report is the foundation and important guarantee for the formation of a high-quality dissertation. As the first responsible person for postgraduate training, the supervisor should effectively select the topic for the postgraduate dissertation. The topic selection of the dissertation should come from the supervisor's scientific research project or self-selected project. The topic selection of the dissertation should focus on engineering practice or have a clear engineering technical background, which can be the research and development of new technologies, new processes, new equipment, new materials, and new products. The dissertation opening report should generally be completed in the second semester. For details, please refer to the "Regulations on the Dissertation Opening Report of Shaanxi University of Science and Technology" and the implementation rules of the college's opening report. The dissertation defense can be applied for at least 18 months after the opening report is passed.

2. Dissertation writing

The paper should have certain technical requirements and workload, reflecting the author's ability to comprehensively apply scientific theories, methods and technical means to solve engineering technical problems, and have a certain theoretical basis. The specific requirements are as follows:

1) The literature review should have a clear description and analysis of the engineering and technical issues involved in the topic selection and the domestic and foreign status of the subject;

2) The content of the thesis can be engineering design and research, technical research or technological transformation plan research, engineering software or application software development, engineering management, etc. Analyse problems and provide independent opinions in certain aspects;

3) The dissertation work should have certain technical difficulty or theoretical depth, and the dissertation results should be advanced and practical;

4) The thesis work should be completed independently under the guidance of the supervisor;

5) The thesis writing requires clear concepts, reasonable structure, clear layers, smooth text and format, and standardized layout.

3. Dissertation defense and degree award

1) Graduate students should complete all the links specified in the training program, complete the credits and pass the grades before applying for dissertation defense.

2) The dissertation review work is strictly implemented in accordance with the "Blind Review Method for Master's Degree Thesis of Shaanxi University of Science and Technology";

3) Only those who pass the blind review of the dissertation can enter the dissertation defense. Postgraduate dissertation defense and degree conferring work are strictly implemented in accordance with the "Implementation Rules for the Conferring of Master's Academic Degrees of Shaanxi University of Science and Technology".

IX.Edit Members

Group Leader：汤伟

Vice Group Leader：杨南

Members：李巍 石勇 史永胜 陈景文 刘宝泉 王素娥 康家玉 谢仕宏 李英春

Curriculum for International Masters in Electrical Engineering